Garage Door Cable Repair in New Brighton, MN
- Thursday, 05 November 2015 10:00
Garage Door Repair MN
The Garage Door is one of the things that should work the same way every day; you push the button on the remote control and the Garage Door Opener turns on and the door begins to open. You pull your car in the Garage and push the wall button and the door begins to close. This process happens more often in the day than most people realize and eventually something will break down. With such a large moving piece of equipment there are a lot of different moving parts and many of these things have a lot of strong tension on them. If you go to push the button on your remote and the door starts going up and suddenly something snaps and the door goes crooked you may have just had a Garage Door Cable break.
Dangers of Do-it-Yourself Garage Door Repairs
In New Brighton, MN we had a customer that had their Garage Door Cable Break in the morning when they were on the way to drop their kids off at day care. Often times this is a very inconvenient problem because you can never predict when a cable is going to break but unfortunately it is one of those things that will eventually break. This is where it is important to have a professional handle the repair because of the amount of tension that is put on these cables and if one snaps or pops off within the vicinity of any body parts it can actually cut in to your skin. For the customer in New Brighton, MN we were able to arrive at their residence on the same day within only a few hours and make the repair. Don’t let a Broken Garage Door Cable stop your day and make sure you call Garage Door Repair Company for guaranteed Same Day Service.
Causes of Broken Garage Door Cables
There are a few different ways you can avoid the inconvenience of a Broken Garage Door Cable. Maintaining the door, lubricating moving parts, or even having it replaced every few years. We also do have some thicker gauge cables that can be used to last longer than the standard cables. Here are a few other things that can be checked and maintained to avoid Garage Door Cable snapping:
- Check your Bottom Brackets for Rust
- Check your Bottom Seal for wear and tear or leaks
- Make Sure your Aluminum Retainer isn’t Bent or Broken
- Inspect where the Cables are attached to the Brackets
- Lubrication of all moving parts
The Garage Door is one of the things that should work the same way every day; you push the button on the remote control and the Garage Door Opener turns on and the door begins to open. You pull your car in the Garage and push the wall button and the door begins to close.
Broken Garage Door Cable in Plymouth MN
- Tuesday, 29 September 2015 16:02
The Garage Door is often times considered a luxury of life that not many of us are really thinking about, of course, until the Garage Door breaks down. There are many different problems that can occur with the Garage Door but one of the more difficult repairs is when a broken cable happens to your Garage Door. This often times will happen when the door is opening or closing and because of the weight of the door being supported by the Torsion Springs the door will end up going crooked and jamming completely. In Plymouth, MN we were out servicing a customer for some new bottom seal and new precision bearing rollers but while we were inspecting the entire Garage Door we found that their cable was down to only a few steel threads and was about to snap at any moment. We were able to replace their cables before they broke which can cause even more damage and costs.
Don’t Wait Until it Breaks
It is always a good recommendation to have your Garage Door inspected at least once per year for any damages, safety concerns, or just a good old fashioned tune-up. Especially living in Plymouth, MN or any other area of Minnesota we know the harsh conditions we can go through with the weather; the hot humid summers and the brittle cold winters can really take a toll on your Garage Door and your cables. If a Broken Cable occurs with your Garage Door it can cause a lot more problems than just the repair and replacement of your Broken Cables which is why we always say don’t wait until it breaks and get your Garage Door inspected yearly.
Other Problems a Broken Cable Can Cause:
When a Garage Door Cable snaps there are many other concerns that need to be looked at and possibly repaired, here are a few of those concerns:
- Crooked Door Causing Bent Panels
- Bending and Twisting of the Track System
- Roller Heads Popping Off
- Broken Bottom Brackets
- Broken Hinges
- Bending or Breaking of the Rail
- The Entire Door Falling out of the tracks and possibly damaging vehicles inside the Garage
- The Door Could Fold in on Itself
These are just some of the concerns that can happen and when this does happen it can end up being very costly. If you have your Garage Door properly maintained you can often times avoid these kinds of emergencies. Get your peace of mind and always have the experts at Garage Door Repair Company inspect and maintain your Cables and any other Garage Door concerns in Plymouth, MN and the entire Twin Cities area.