bent and broken

The Garage Door is one of the things that should work the same way every day; you push the button on the remote control and the Garage Door Opener turns on and the door begins to open. You pull your car in the Garage and push the wall button and the door begins to close. This process happens more often in the day than most people realize and eventually something will break down. With such a large moving piece of equipment there are a lot of different moving parts and many of these things have a lot of strong tension on them. If you go to push the button on your remote and the door starts going up and suddenly something snaps and the door goes crooked you may have just had a Garage Door Cable break.

Dangers of Do-it-Yourself Garage Door Repairs

In Maplewood, MN we had a customer that had their Garage Door Cable Break in the morning when they were on the way to drop their kids off at day care. Often times this is a very inconvenient problem because you can never predict when a cable is going to break but unfortunately it is one of those things that will eventually break. This is where it is important to have a professional handle the repair because of the amount of tension that is put on these cables and if one snaps or pops off within the vicinity of any body parts it can actually cut in to your skin. For the customer in Maplewood, MN we were able to arrive at their residence on the same day within only a few hours and make the repair. Don’t let a Broken Garage Door Cable stop your day and make sure you call Rise & Shine Garage Doors for guaranteed Same Day Service.

Causes of Broken Garage Door Cables

There are a few different ways you can avoid the inconvenience of a Broken Garage Door Cable. Maintaining the door, lubricating moving parts, or even having it replaced every few years. We also do have some thicker gauge cables that can be used to last longer than the standard cables. Here are a few other things that can be checked and maintained to avoid Garage Door Cables snapping:

  • Check your Bottom Brackets for Rust
  • Check your Bottom Seal for wear and tear or leaks
  • Make Sure your Aluminum Retainer isn’t Bent or Broken
  • Inspect where the Cables are attached to the Brackets
  • Lubrication of all moving parts

Whether it is your Garage Door Cable that breaks or any other repair that is needed trust the experts at Rise & Shine Garage Doors with all your Garage Door needs. Call 612-886-9606 or visit our Contact Page to fill out one of our website appointment forms today!